|
 |
|
 |
|
Koshin Ponstar PB PX & PXL Submersible Pumps Sewage & Waste Water Pumps Puddle Sucker Pumps
Cheap Ponstar Pumps from £206.00
Ponstar PX Pumps 2" outlet Excellent durability suitable for various purposes. Twin mechanical seals, one carbon and one silicon in a lubricated chamber. Mostly an alloy construction. Impeller and volute plate are made from a special rubber to give a longer life than the traditional cast iron. Complete with 10 metres of power cable, hosetail clip and 5 metres of rope. Designed so that the delivery flange can be altered from vertical to horizontal. Suction will operate up till 20mm depth. Compact design 20% smaller in size.
Applications
Suitable for heavy duty applications in clean and dirty water
Draining at engineering and construction sites.
Pond and aquarium usage.
Agricultural irrigation.
Home and domestic application.
Puddle sucker down to 20mm.
Ponstar PB Pumps Strong in muddy water, and outstanding in power and endurance. The original Ponstar 2" outlet. Heavy duty construction and strong in performance. Capacitor start, induction run motor for that extra starting torque. Twin mechanical seals, one carbon and one silicon in a lubricated chamber. Stainless steel motor casing, volute plate and plate shaft. Cast iron impeller. Pump casing, lower motor casting, top motor cover and outlet hose coupling are made from alloy. Because of the discharging structure with water channel going through the outer wall, the motor cooling affect is high and space for insulation can be small. It is compact, light-weight, easy to carry and handle. Liquid parrafin is used in the shaft seal, therefore water will not be contaminated even in case of oil leakage.
Applications
Suitable for heavy duty applications in clean and dirty water.
Draining at civil engineering and construction sites.
Draining at office buildings, factories, warehouses, basements etc.
Water supply and drainage at farms, fisheries (fresh water), gardens and other raising farms.
Water supply and draining at homes.
Sewage and waste-flood water
Ponstar PXL Residue Pumps 1" outlet Suitable for clean water pumping. Complete with internal check valve and has to be primed if using in shallow water. Twin mechanical seals, one carbon and one silicon in a lubricated chamber. Mostly an alloy construction. Impeller and volute plate are made from a special rubber to give a longer life than the traditional cast iron. Complete with 10 metres of power cable, hosetail, hose clip and 5 metres of rope. Designed so that the delivery flange can be altered from vertical to horizontal. (To stop that annoying kink in the hose).
Applications
Suitable for clean water pumping only
- Disposal of residual water from roof tank of buildings,swimming
pool, etc.
- Water drainage at construction site.
- Drainage of underground water.
- Narrow access drainage especially in manhole or bottom pit puddle sucker down to 20mm.
Seen These Pumps Cheaper Elsewhere E-mail sales@allpumpsdirect.com
|
|
 |
|
 |
|
 |
|
 |
|
Suction Hose
Special discount prices when ordering with these pumps only !
1"hose for the PXL model
2" hose for the PB & PX models
|
|
 |
|
 |
|
 "Click to enlarge image(s)")
 "Click to enlarge image(s)")
 "Click to enlarge image(s)")
 "Click to enlarge image(s)")
 "Click to enlarge image(s)")