Gear pumps are available in bronze. Bronze pump casing, gears made from AISI 316 stainless steel. For special orders they can be made in all AISI 316 stainless steel upon request.
Ports - 1" in 3/4" out
H x W x L - 210 x 140 x 300
LM/HM - 20/30
kW/Amps - 0.2/9
24volts
This powerful pump will transfer high viscosity oils (up to 800cst)with ease.
It is a handy and compact pump provided with a carrying handle, so that it can be transported to on-site applications easily.
The noise, generated during operation, is kept at an extremely low level.
It is provided with a by-pass valve to protect the motor.
The pump's main use will be as an oil change pump for various types of oils.
GEAR 300GM-GE03 & 300GT-GE04 Volumetric self priming electric drive gear pump - from £451.27
Click to enlarge image(s)
Volumetric self priming gear pumps with built in bypass valve. Performances will vary depending on media being pumped. Decllared performances have been obtained pumping liquids with a viscosity of 8 degree Engler.For higher viscosity of more than 10 degrees Engler 6 pole motors are available as special orders. Maximum self priming depth 3 metres and a maximum liquid temperature of 140 degrees centigrade. Viton mechanical seal. Bypass is adjustable between 0-10 bar. Casing made from cast iron, gears made from C40 steel. 1440 rpm motor. Suitable for pumping viscous liquids without suspended particales - hydraulic oil, vegetable oil, varnishes and foodstuffs are examples. Not suitable for liquids that have water within them.
Port 1/2"
H 210 X W 170 X L 390
LM 5
HM100
Kw 0.26
ALL PRICES INCLUDE VAT & DELIVERY
GEAR 600GM-GE09 & 600GT-GE10 Volumetric self priming electric drive gear pump - from £492.03
Click to enlarge image(s)
Volumetric self priming gear pumps with built in bypass valve. Performances will vary depending on media being pumped. Decllared performances have been obtained pumping liquids with a viscosity of 8 degree Engler.For higher viscosity of more than 10 degrees Engler 6 pole motors are available as special orders. Maximum self priming depth 3 metres and a maximum liquid temperature of 140 degrees centigrade. Viton mechanical seal. Bypass is adjustable between 0-10 bar. Casing made from cast iron, gears made from C40 steel. 1440 rpm motor. Suitable for pumping viscous liquids without suspended particales - hydraulic oil, vegetable oil, varnishes and foodstuffs are examples. Not suitable for liquids that have water within them.
Port 3/4/"
H 210 X W 170 X L 410
LM 10
HM100
Kw 0.37
ALL PRICES INCLUDE VAT & DELIVERY
GEAR 1000GM-GE15 & 1000GT-GE16 Volumetric self priming electric drive gear pump - from £561.42
Click to enlarge image(s)
Volumetric self priming gear pumps with built in bypass valve. Performances will vary depending on media being pumped. Decllared performances have been obtained pumping liquids with a viscosity of 8 degree Engler.For higher viscosity of more than 10 degrees Engler 6 pole motors are available as special orders. Maximum self priming depth 3 metres and a maximum liquid temperature of 140 degrees centigrade. Viton mechanical seal. Bypass is adjustable between 0-10 bar. Casing made from cast iron, gears made from C40 steel. 1440 rpm motor. Suitable for pumping viscous liquids without suspended particales - hydraulic oil, vegetable oil, varnishes and foodstuffs are examples. Not suitable for liquids that have water within them.
Port 3/4"
H 210 X W 170 X L 450
LM 15
HM100
Kw 0.55
Volumetric self priming gear pumps with built in bypass valve. Performances will vary depending on media being pumped. Decllared performances have been obtained pumping liquids with a viscosity of 8 degree Engler.For higher viscosity of more than 10 degrees Engler 6 pole motors are available as special orders. Maximum self priming depth 3 metres and a maximum liquid temperature of 140 degrees centigrade. Viton mechanical seal. Bypass is adjustable between 0-10 bar. Casing made from cast iron, gears made from C40 steel. 1440 rpm motor. Suitable for pumping viscous liquids without suspended particales - hydraulic oil, vegetable oil, varnishes and foodstuffs are examples. Not suitable for liquids that have water within them.
Port 3/4"
H 210 X W 170 X L 460
LM 25
HM100
Kw 0.75
Volumetric self priming gear pumps with built in bypass valve. Performances will vary depending on media being pumped. Decllared performances have been obtained pumping liquids with a viscosity of 8 degree Engler.For higher viscosity of more than 10 degrees Engler 6 pole motors are available as special orders. Maximum self priming depth 3 metres and a maximum liquid temperature of 140 degrees centigrade. Viton mechanical seal. Bypass is adjustable between 0-10 bar. Casing made from cast iron, gears made from C40 steel. 1440 rpm motor. Suitable for pumping viscous liquids without suspended particales - hydraulic oil, vegetable oil, varnishes and foodstuffs are examples. Not suitable for liquids that have water within them.
Port 1"
H 210 X W 170 X L 465
LM 335
HM100
Kw 1.1
ALL PRICES INCLUDE VAT & DELIVERY
GEAR 3000GM-GE33 & 3000GT-GE34 Volumetric self priming electric drive gear pump - from £759.71
Click to enlarge image(s)
Volumetric self priming gear pumps with built in bypass valve. Performances will vary depending on media being pumped. Decllared performances have been obtained pumping liquids with a viscosity of 8 degree Engler.For higher viscosity of more than 10 degrees Engler 6 pole motors are available as special orders. Maximum self priming depth 3 metres and a maximum liquid temperature of 140 degrees centigrade. Viton mechanical seal. Bypass is adjustable between 0-10 bar. Casing made from cast iron, gears made from C40 steel. 1440 rpm motor. Suitable for pumping viscous liquids without suspended particales - hydraulic oil, vegetable oil, varnishes and foodstuffs are examples. Not suitable for liquids that have water within them.
Port 1"
H 210 X W 170 X L 525
LM 50
HM100
Kw 1.5
ALL PRICES INCLUDE VAT & DELIVERY
GEAR 3600GM-GE39 & 3600GT-GE40 Volumetric self priming electric drive gear pump - from £825.80
Click to enlarge image(s)
Volumetric self priming gear pumps with built in bypass valve. Performances will vary depending on media being pumped. Decllared performances have been obtained pumping liquids with a viscosity of 8 degree Engler.For higher viscosity of more than 10 degrees Engler 6 pole motors are available as special orders. Maximum self priming depth 3 metres and a maximum liquid temperature of 140 degrees centigrade. Viton mechanical seal. Bypass is adjustable between 0-10 bar. Casing made from cast iron, gears made from C40 steel. 1440 rpm motor. Suitable for pumping viscous liquids without suspended particales - hydraulic oil, vegetable oil, varnishes and foodstuffs are examples. Not suitable for liquids that have water within them.
Port 1 1/4"
H 210 X W 170 X L 525
LM 60
HM100
Kw 1.8
 "Click to enlarge image(s)")
 "Click to enlarge image(s)")