In a typical 007-F5 pump model, each impeller pressure gives an increase of approximately 9 psi (60 kPa). For example, a typical 10-cell pump generates a pressure of about 90 psi (600 kPa) at the output (ie 10 x 9 wheels psi). Lift and Taco 007 pump performance depends on the impeller diameter and width of the blades of the impeller. Pump pressure is a function of the number of impellers. As an example, a 007-F5-IFC pump with a capacity of 1 / 2 horsepower could pump a large volume of water at low pressure, while the Taco 007-F3 pump with a capacity of 1 / 2 horsepower pump out less, but at higher pressures. As in all Circulating pumps, increasing the depth of the well or the pressure at the outlet leads to poor performance.
Taco 007 F3 F5
The more sections of a Taco 007 pump, the higher rise of the liquid.
